nelson_final_draft019011.jpg
nslogo793x138.gif
There are no express or implied warranties which extend beyond the description on the face hereof. Nelson Specialties, Inc. disclaims and excludes from any sale of products herein, any implied warranties or merchantability, or of fitness or suitability for any particular purpose or use. All goods manufactured and / or sold by Nelson Specialties, Inc. are purchased by the buyer “AS IS”. Since Nelson Specialties, Inc. cannot control the manner or use of its products after their sale, Nelson Specialties, Inc. will not be responsible for any direct, consequential or indirect damages to the purchaser or any third party or ultimate user of the products. Nelson Specialties, Inc., will at its option, either replace the goods sold or refund the purchase price should a product defect be brought to its attention within a reasonable time after the sale.
nelson_final_draft019010.jpg
nelson_final_draft019009.jpg
nelson_final_draft019008.jpg
nelson_final_draft019007.jpg
nelson_final_draft019006.jpg
nelson_final_draft019005.jpg
nelson_final_draft019004.jpg
Welcome
Worksheets
Products
Services
About Us
Contact Us
nelson_final_draft019003.jpg
wc_dash_harness.jpg
Dual Above Dash Harness
nelson_final_draft019002.jpg
nelson_final_draft019001.jpg
Conforms to Nascar 20-6.1.1. Also accepted by ARCA and Hooters Pro Cup
P/N 10245 (rear distributor)
P/N 10245B (front distributor)

All wire is 16 ga. Teflon 1000 volt mil-spec rated
All non-Weatherpack connectors are HT nickel plated
Wires are color coded per rule
Includes primary-secondary mil-spec switch and plate assembly w/on LED
Optional dual 12 volt supply wire for distributor power from selector switch
Dual distributor leads with each pair twisted and covered with a fully braided shield
Ground pigtails terminate with 1/4" ring connectors
All Weatherpack connectors are female sockets with female tower shells
Tachometer signal diode isolation is included
Tachometer connector has 3 socket female tower connector
Included connector for auxiliary on/off button (rule 20-6.6) w/test jumper